How to Overclock your Mining Rig while using less Power - Build a Mining Rig

Welcome to another guide here at Build a Mining Equipment!

Today I’m going to voorkant how to do a plain overclock and under volt on Windows. Te case you have never heard of overclocking, it is when wij adjust the clock speeds of the GPUs so that wij squeeze the most amount of power out of them.

It is common for both miners and gamers to attempt to squeeze a bit more vertoning out of their GPUs. Wij can usually get a 20% increase out of them which is fairly phenomenal.

On the under mitt, while wij are overclocking, wij can also under volt. When wij under volt, wij are going to supply less power to the GPUs. Spil you can imagine, this is enormously beneficial for the sake of saving money violet wand. Wij can usually securely druppel down a movie card to 60% of it’s normal intake.

This can dramatically druppel your monthly violet wand bill, which would certainly make the Mrs. blessed.

What You’ll Need:

  • MSI Afterburner

MSI Afterburner

This program is all that you’ll need to perform the Overclock/Undervolt. If you are running Linux, setting this up is a fully different process.

After wij have set this program up, it will automatically begin with Windows, and apply your settings to your GPUs.

You also have the capability to lower the fan speeds, te case you want to make your mining equipment less noisy. This isn’t usually a good idea unless the temperature of your huis/garage is cool enough to keep the temperature of the GPUs down.

How to Setup MSI Afterburner

The very first thing you vereiste do is download MSI Afterburner. Here is the Listig to do so.

Once you have downloaded and installed MSI Afterburner, embark it up and now it’s time for the effortless part.

MSI Afterburner is very user friendly program.

Ter the middle just below the clock settings, It’ll will list the GPU that is presently selected.

To the right of that, there is a little crimson arrow. If you click the arrow, it will give you a list of all of the detected GPUs. You can select each one individually, or click the squiggly line, and select all of them.

To the left, you are given stats about the clock speeds that your GPUs are presently running at.

To the right, you can see the temperature of the GPU you have presently selected.

How to Overclock your Mining Equipment

Now that you have familiarized yourself with MSI Afterburner, it’s time to make the necessary switches.

1. Very first, wij are going to adjust the “Memory Clock” to 600.

You can raise this to a higher number, but your miner might become unstable. Some GPUs can treat a higher speed than 600. You can attempt raising it some more, but if your miner and/or equipment crashes, lower it down to a more stable point.

By adjusting the power limit to 65, you will have dramatically decreased the amount of power that your GPUs are consuming. Be careful not to druppel it down lower than this. If so, your GPUs might not have enough power to function decently.

Three. Open the List of GPUs and make sure that all of them are selected by clicking the squiggly line.

Four. Now click the check mark. This will apply your fresh settings to all of your GPUs.

Five. Make sure to click the little Windows logo below “Startup”.

This will configure MSI Afterburner to open on startup. Your settings are only valid while MSI Afterburner is open. You need to select this so that MSI Afterburner opens and applies your settings overtime you reboot your equipment.

6. Wait to see if your Mining Equipment is Stable

After you adjust the settings of your movie cards, you are going to want to keep an eye on the stability of your mining equipment. If you raised your memory clocks too high, your system might crash 20-30 minutes into mining.

If your system does crash, you are going to want to lower the memory clock or possibly raise the power level. Keep repeating this process until you find functional mining settings. Most likely, if you use the mining settings that I suggested, your system will remain stable.

Recap

It’s not very difficult to overclock your equipments while lowering their power consumption. Spil mining becomes more difficult, it only makes sense to acquire a higher amount of hashing power from your movie cards.

It is even more significant to lower your power consumption. Consuming too much power can waterput a major cargo on your mining operation, and this elementary guide will help alleviate that cargo.

Related movie: CNBC: Vraaggesprek with Tormentor Richard Branson & Mike Novogratz re. Bitcoin & Cryptocurrency